Ghost Car Immobiliser
Ghost is a revolutionary anti-theft device that stops your car from starting without entering the sequence pin. It is undetectable and works with the CAN data networks.
ghost car immobiliser can be programmed to a unique pin code which is used to access buttons on the steering wheel or centre console, or on door panels. This makes it extremely effective against the latest methods of theft such as key cloning and relay vehicle hacking.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget, protects your car from hacking and key cloning. It can also prevent key theft. It's invisible, inaccessible to thieves and TASSA certified (a 3rd party group of security and police experts) - making it among the most reliable security devices on the market.
The ghost system is connected to the CAN bus in your vehicle, the network that houses electronic control units (ECUs) that control the engine, transmission and brakes. It also stops the vehicle from starting until a unique PIN code sequence is entered. The PIN code is programmed through buttons on the steering wheel, center console, or door panels. The sequence could be as long as 20 presses, making it difficult for thieves to guess a correct code.
Unfortunately, a number of determined criminals are attempting to get around these advanced security systems. One method is jamming or spoofing the signals of the ECU and the Ghost Immobiliser. Another is by locating and connecting to the CAN bus and then sending malicious commands to the vehicle's ECU. These can then disable the vehicle or make it inoperable. Installing additional security measures, such as an alarm and GPS tracker can help keep your car secure.
A ghost immobiliser is an ideal addition to your other security measures. It can be easily and quickly installed without the requirement for additional hardware or visible parts that could alert thieves to its presence. The device can also be concealed under your dashboard or behind the steering wheel, so it's difficult for thieves to find. It is silent and cannot be detected using radio frequencies.
However, you must install your ghost immobiliser using a Thatcham or Autowatch approved installer. They are certified professionals who know your vehicle inside and out. They will know where to put the device so that it is hidden from prying eyes. sources tell me is recommended to also use a Thatcham-approved tracker and dash camera that has your ghost immobiliser for the best protection.
There aren't any keyfobs or LEDs or other indicators that can help you locate it.
It's becoming increasingly difficult to secure your valuable items from theft by vehicle. Fortunately, the makers of Ghost Immobiliser have stayed one step ahead by developing technology that is completely undetectable to thieves. This anti-theft device is at the forefront of technology, safeguards your car against key cloning or hacking. It is also able to prevent theft. It communicates with the ECU through the CAN data circuit and is completely undetectable by any scan or code grabbing technology.
The device is unnoticed by car thieves as it does not have any lights or radio signals. It makes use of buttons on your car such as the dashboard or steering wheel to generate a unique code that must be entered to begin the vehicle. This can be changed at anytime and gives you full control over your security. Additionally it will not permit thieves to insert new key fobs or to replace the ECU, preventing them from stealing your car.
Another way that the device stops theft is by the detection of signal relay attacks. The device can detect signal relay attacks, in which thieves amplify the signal from your current key fob in order to bypass an immobiliser. The Ghost system is able to detect this and disable your key fob to prevent thieves from starting up your car.
You can also use the Ghost app on your smartphone to access a service mode that allows you to start your car without your pin. This is a great option if you want to drive your car to a garage for servicing or valet parking. In addition, the app will notify you if your vehicle has been removed from its original place.
As you can see, there are a myriad of reasons to consider a ghost immobiliser. It is simple to use, discrete and protects you from many dangers. It's also TASSA-certified that means it has passed rigorous tests by an independent organization. If you're thinking about installing a ghost immobiliser, be sure to choose an authorized dealer who is TASSA certified. This will ensure that the installer is properly trained and certified, and will work with the interface of your vehicle to offer the best security.
No permanent damage to your vehicle
The Ghost immobiliser is hidden behind the dashboard and beneath the steering wheel, which means thieves aren't able to see it, or even see it. This is a major advantage over immobilisers with traditional features that could be visible and easily bypassed by signal cloning or jamming devices. This is especially beneficial for luxury vehicle owners who are looking to maintain their car's aesthetics and performance while also adding an extra layer of security.
The Ghost CAN Bus immobiliser also makes use of buttons on your vehicle's steering or centre console as well as door panels to create an unique pin code. The pin code must be entered before you are able to drive. This pin code works just like a credit card and you can configure it to be up to 20 characters in length. This makes it much more difficult for thieves to copy or hack into the system and ensures that only you have access to your vehicle.
It is essential to employ an expert installer when installing a ghost immobiliser. This will help ensure that the device is properly installed and doesn't cause any damage to your vehicle. A professional can also assist you to troubleshoot any problems with your vehicle and offer guidance on how to solve them.
Before starting the installation It is recommended that the battery is disconnected. This will prevent any electrical issues or accidental airbag deployment. It is crucial to label and label the CAN H wires and CAN L wiring as incorrect identification can lead to problems with the system or improper installation. Once you have identified the power source as well as a grounding point, it is crucial to protect these connections by using insulation tape or heat shrink tubing to safeguard them from short circuits. It is a good idea to also test the immobiliser once it has been installed to make sure that it functions as intended.

The Ghost Immobiliser can be a effective tool to combat vehicle theft. However, it is not completely secure. Thieves are constantly developing new tactics to bypass security systems, which is why it is crucial to use it in conjunction with other advanced security measures and remain vigilant. Following these tips will help you reduce the risk that your vehicle is stolen and give you peace of mind, regardless of where you park your vehicle.
TASSA verified
In recent years, car owners have taken additional security measures to safeguard their vehicles. ghost car immobiliser is to install a ghost immobiliser which is designed to stop vehicles being taken by key-cloning and hacking. But determined thieves will always find ways to bypass these security devices.
To stop this, a new generation of immobilisers has been created by the likes of Autowatch. The new devices have been certified TASSA-certified, meaning they have been independently tested by third party experts to ensure that the device is incredibly reliable. This proves that the device is able to deter even the most experienced thieves.
The device is discreet and invisible to thieves, and works by connecting directly to the buttons of your vehicle. You can set up an unique PIN sequence that needs to be entered using the buttons on the steering wheel or center console to begin or drive your vehicle. The system is also quiet and will only function when the correct PIN code is entered. As the device does not emit radio frequencies, it is not detected by conventional detection methods like radar guns or scanners.
The Ghost II is also a Thatcham-approved device. This means it will be recognized by insurance companies as a level of security that can lower your premium depending on the insurance company's requirements. This makes it the most reliable and sophisticated immobiliser available.
This will also ensure that the company you choose to install the device is fully qualified. You can then rest that you're getting quality installation and the best service. This is essential if want your insurance company to recognise the ghost as it could be very useful in the event of your vehicle being stolen.